Click image to see full size

Roach Conveyors - Model 751RB Heavy Duty Roller Bed Belt Conveyor

Roach 751RB is the choice for heavier unit loads. The heavy duty roller bed construction makes model 751RB ideal for transporting heavy loads with low power requirements.

Features:
• BELTING: PVC-120 black.
• CARRIER ROLLERS: 2-1/2" dia. x 11 ga. steel, model 251S.
• DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft on 15"-39" BF; 12" dia. with 1-15/16" dia. shaft above 39" BF; both machine crowned and fully lagged.
• TAIL PULLEY: 4" dia. with1-3/16" dia. shaft on 15"-39" BF; 6" dia. with 1-7/16" dia. shaft above 39" BF; both machine crowned.
• RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
• BELT SPEED: 35 FPM, constant.
• END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
• TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.
• BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
• BED: 7" x 1-1/2" x 10 ga. channel frame. Bed sections attach with couplings and floor supports.
• SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9" x 12 ga. steel, model 192S on 15"-39" BF, 1.9" x 9 ga. steel, model 199S on 45"-57" BF.
• SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.
• ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
• MOTOR DRIVE: 1 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• ELECTRICAL CONTROLS: Optional.

24 Hour Shipment