Click image to see full size

Roach Conveyors - Model 700SBF Slider Bed Inclined Floor to Floor Belt Conveyor

Model 700SBF floor-to-floor conveyor provides higher load capacity, reversible flow and nose-over allows for simple adjustments for inclines 0-35 degrees. Shown with optional supports, knee braces, chain driven feeder and right hand drive. All units furnished standard with left hand drive.

Features:
• BELTING: Black PVC ruff-top.
• DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft, both machine crowned and fully lagged.
• TAIL PULLEY: 4" dia., machine crowned, with 1-3/16" dia. shaft.
• RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.
• CENTER DRIVE: Reversible drive with 24" integral belt take-up.
• BELT SPEED: 60 FPM, constant.
• SAFETY POP-OUT ROLLER: Standard on both ends, 1.9" dia. x 16 ga. steel roller, model 196S.
• NOSE-OVER: Provides smooth transition from incline to horizontal position. Single nose-over adjusts 0-20°; double nose-over adjusts 0-35 degrees (specify single or double).
• BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
• BED: 7" x 1-1/2" x 12 ga. channel frame with 14 ga. slider bed 9"-39" BF; 12 ga. bed 33" BF and above with bed pan braces.
• ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
• MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
• FLOOR SUPPORTS: Optional.
• ELECTRICAL CONTROLS: Optional.

24 Hour Shipment