Material Flow & Conveyor Systems Inc. News

Why does my Air Lift go up in stages? It seems to jump 2" to 4" at a time.

Uneven air flow or air pressure is too high. The Air Lift works best at 100 psi. It will still jump some, but not as radical.

Why is air leaking from the cylinder at the cylinder end plate or cylinder?

Seals may be worn and may not seal properly. Oil cylinder walls. This will allow the seals to seat properly. Use a 1:1 mixture of 30 wt motor oil and STP (1 oz of each). Squirt mixture in ½” hole in cylinder end plate. This should be done at least twice a year.  The best solution for long seal life is to place an in-line dryer (to remove moisture from the air) and an inline oiler to the air line supplying the lift. Replace seals. Use cylinder repair kit 11183.

What size of air compressor do I need to operate the lift?

Almost any size air compressor will work as long as it can produce 100 psi. pressure. The lift uses very little air.

Why does the foot pedal leak air?

Oil around valve stem with tool oil sometimes helps valve to seat better. Replace valve stem (12887)

Why won't my lift go up without help at the bottom of the stroke?

The air line is restricted. The air line may be pinched under the lift frame. Move the airline. The hose may be bent too much under the table. The foot pedal needs to be on the same side of the table as the 90 degree elbow from the cylinder points.

Why is oil leaking from the cylinder or foot pedal?

The oil drip is caused by air flowing through the foot pedal and the cylinder.  This is common. The oil is assembly oil used at the factory to help the seals and allow the cylinder piston and valve stem to move freely. Oil is used to coat the cylinder walls to prevent rust from forming due to moisture in the air. One way to keep oil off your floor is to throw a rag under the foot pedal and it will absorb the excess oil.

Every smooth running warehouse or storage facility must know where inventory and supplies are at all times. If products always stayed in the same place this would be an easy task, but because inventory storage is a fluid system, this is not the case. Removable label holders solve this problem.

While an upfront investment is required, it has been well documented that the payback is easily justified by ease of normal changes and cost savings of up to 50 percent in materials by eliminating expensive and hard to move self adhesive labels. Labor savings are also gained by eliminating the time it takes to remove self adhesive labels. One case study confirmed that major retailers saw a return on initial investment within the first 12 months of investment.

Besides the obvious organization benefits, removable labels also offer bar code protection. Facilities that use an automated bar coded inventory system must protect their bar codes from dirt and moisture. Failure to protect bar codes can result in an inaccurate scan.

View our full selection of Label Holders

Label Holder Applications:
• Pallet Rack: Top loading or scannable label holders work well for this application.
• Wire Shelving: Perfect for offices, hospitals and any place wire shelving is used.
• Steel Shelving and Flow Rack: Label Holders for heavy duty industrial applications.
• Retail Shelving: Perfect for labeling products with pricing.
• Plastic Bins and Totes: Keep track of small parts and tools.

What Lift Height is Required?
Fixed mast units range from 50” – 86”. Telescopic (2 stage) mast
units range from 94” to 144”.

What is the Weight of the Heaviest Load?
1000, 1500, 2000, 2700 lbs. and 3000 lbs. capacities are available.
Take into consideration added weight of pallet or container.

What is Length (Front to Back) of Load?
Load center capacity is as important as weight
capacity (see separate load center (L.C.) diagram pg. 13).
• 48” long pallets require 24” L.C.
• 40” long pallets require 20” L.C.
Length of load must not be longer than twice the size
of the rated load center.

What Type of Lifting Power?
Manual operated lifts for lighter weights and lighter work cycles.
Electric (AC or DC) for heavier work cycles and loads.

What About Overall Height?
Overall height is 14” – 18” higher than lifting height. Take into
consideration doorways, pipes, lighting and overhead obstructions.

What are the Width Restrictions?
With or without load, check width of doorways, narrow aisles or
congested areas to be navigated.

What Type of Load is Being Lifted?
Would special attachments help? Ram, boom with hook, remote
control, special forks or platforms, etc. (See options and
attachments page 12 and 13.)

Platform Models
Platform models are used as portable lift tables in numerous
ergonomic applications. (Oversize platforms available on special order.)

Non-Straddle Fork Models
Non-straddle fork models have base legs close together. Normally
used for skids where wheels and base legs, as well as forks go
under skid.

Straddle Fork Models
Straddle fork models have wider base legs (out-riggers) which
straddle load or pallet. (Example: a 48” wide pallet requires 50” I.D.
straddle legs.)

Custom Applications
Many standard lifts can be modified for special lifting tasks. Please
consult our technical sales department.

Please call Material Flow @ 800-338-1832

Tennsco makes storage products for almost any application!

Tennsco Lockers:
Tennsco lockers feature heavy duty steel construction and vandal resistant recessed handles for secure storage of clothing and personal belongings. Rubber bumpers, a cushioned locking channel and door stiffeners provide a smooth, quiet operation, while their durable workmanship stands up to the toughest use. A choice of powder coated paints provides a tough finish that will compliment any decor.

Tennsco Storage Cabinets:
Tennsco has one of the broadest offerings of steel storage and wardrobe cabinets. Sizes range from desk height to their Jumbo 48" W x 78" H cabinet. Both Tennsco Deluxe and Standard Cabinets feature heavy gauge steel constructio throught for maximum rigidity and trouble free performance at an exceptional value. All cabinets have easily adjustable shelves which do not require easily misplaced clips.

Tennsco Q-Line Shelving:
Tennsco's Q Line Industrial Shelving is the system of choice when heavy duty steel shelves are required. These high performance shelves are available in eighteen different sizes, either 20 or 22 gauge steel and can handle loads of up to 1,000 pounds per shelf. Shelves attach with compression clips to any of three upright styles, making assembly and configuration easy.

Tennsco ESP Shelving:
Tennsco ESP is a commercial grade shelving system for those applicatios that don't require the high load capacities of other Tennsco Shelving. Ideal for offices or backroom applications. Shelves are formed from 22 gauge steel and have load capacities up to 250 pounds. Units are 36" W and 75" high and are availalble in 12", 15", 18" and 24" depths. Everything you need is in one box, ready to assemble quickly... and at an economical price.

Logic Wire Shelving:
Tennsco Logic Wire Shelving is the logical choice for the handling of foods, medical supplies, electronics and other items. Sanitary and easy to clean Logic Wire Shelving is NSF approved for the food industry. Its open wire shelf design minimizes dust collection and permits air circulation, providing full visibility to stored items. The patented Logic clip lets you add or remove shelves without disturbing other levels. Choose from our epoxy powder finish, chrome plating or their extra rust resistant "Logic Coat.

Tennsco Bookcases:
Tennsco Bookcases come in three distinct styles to match the needs of your modern office. All steel construction provide years of reliable storage for books, binders, files or any item you need to display or quickly access. Choose from Executive or Welded styles.

Tennsco Card and Multimedia Storage:
Tennsco card storage units, literature sorters and thirty drawer organizers are your total answer to efficiently storing traditional or odd sized materials. Card files handle anything from paper cards, mirofiche, magnetic media and more. Thirty drawer organizers are perfect for a wide variety of items like small parts, literature etc. Stackable literature sorters offer the ultimate in organizing company materials, internal documents, forms and paper supplies. They're also great for distributing incoming mail throughout your organization.

Tennsco Lateral Files:
Tennsco Lateral Files provide secure and easy access to your documents, with styling that complements today's contemporary office decor. Lateral files feature heavy duty full extension ball bearing suspension, a cam action drawer interlock systems, four corner leveling glides, central key lock and optional spring assisted retractable doors.

Tennsco Fixed Shelf File:
Tennsco's Fixed Shelf File helps take the hassle out of office filing. Whether you're a business or professional practice, you'll really appreciate the convenience and timesaving of a filing unit that requires absolutely no assembly.

Tennsco Workbenches:
Tennsco industrial workbenches are a complete system designed for the rigors of the factory floor. Select from several sizes of steel, hard maples, compressed wood or plastic laminate work surfaces. Tennsco Workbenches feature a wide variety  of heavy duty accessories and electrical options which allow you to design a workstation to fit your particular needs. Tennsco's line of mobile workbenches, foreman's desks, and service carts are sturdy and reliable.

Ultra Stack and Hang Bins: Organize your inventory with strong injection molded plastic bins. Front, back and solo grips for easy handling. Built in rear hanger allows bins to hang from louvered panels or rails. Optional clear plastic window increases bin capacity and provides quick view of bin contents. Dividers maximize flexibility and keep contents organized. Wide stacking ledge and anti-slide lock keep stacked bins steady and prevent forward shifting. Waterproof bins resist rust and corrosion. Large molded front label slots for ID lable. Autoclavable up to 250 degrees farenheit and resistant to extreme cold. Available in blue, yellow, red, green, ivory and black.

Ultra Hanging Systems: Quantum Ultra Bins will hang on louvered panels or rail hanging systems in a wide range of configurations designed to meet all application needs. Hanging systems are either: wall mounted, table top, free standing, or mobile units. Use the system best usited to your need with your choice of Ultra Bins. Systems are formed from heavy duty 16 gaugte cold rolled steel hand have a gray baked enamel finish which ensures year of heavy duty use. Louvered panels may be mounted on any suitable surface including wall,s benches, inside service trucks and cabinetrs or on carts. Fasten securely to assure adequate load bearing. Louvered systems are available as bench units (in 4 sizes). Free standing single and double sided and mobile units.

Ultra Complete Package Units

Bench Racks: 36" L x 8" W x 19" H and 27" L x 8" W x 21" H. Both bench racks are available in 3 preconfigured choices. Bench racks can be joined together to form continuous systems. Louvered Panels: 36" L x 19" H and 18" L x 19" H. Each available in 3 configurations. Louvered panles are available in Gray or Beige color. To order a beige louvered panel add BG to the model number.

Single Sided and Double Sided Rail Units: Single Sided Unit: 36" L x 20" W x 53" H. 500 lb. capacity. Available in 4 different configurations. Mobilize double sided unit with the addition of QRU-MOB. Bins are available in blue, yellow, red, green, ivory and black.

Giant Hopper Bins
Extra large, high denisty, heavy duty open hopper stackable bins are a perfect solution for storing and organizing large parts. Bins have a stack capacity of up to 100 lbs. and can stack up to 6 bins high. Injection molded from high density polypropelene , bins are waterproof and will not rust or corrode and can be cleaned easily. Molded-in divider slots and optional dividers keep parts seperated and organized. Optional clear window increases bin capacity. Permanent lable holder allows for easy parts identification. Available in blue, yellow, red, green, ivory and black.

Hulk 24 Inch Containers:
Organize and store your large and bulky items with these strong injection molded plastic., stackable containers. These extra large stacking containers offer a generous 2 feet in length to store your larger items. These huge stack bins are ideal for back to back use on 48" pallet rack or heavy duty, extra deeps shelving and are avialble in a variety of widths and heights. Heavy duty front, back and side grips allow for easy handling. Optional clear plastic window increases bin capacity and provides a quick view of the bin contents. Optional dividers maximize flexibility and keep contents organized. Wide stacking ledge and anti-slide lock keep stacked bins steady and prevent forward shifting. Waterproof bins resist rust and corrosion. Bins are autoclavable up to 250 degrees farenheit and are resistant to extreme cold. Available in blue, red and yellow.

Hulk 30" and 36" Containers:
Organize and store your large and bulky items with these strong injection molded plastic stackable containers. These extra large stacking containers offer a generous 2 1/2" to 3' in length to store your larger items. These huge stack bins are ideal for heavy duyt, extra deep shelving and are available in a variety of widths and heights. Heavy duty front, backa nd side grips allow for easy handling. Wide stacking ledge and anti-slide locks keep stack bins ready and prevent forward shifting. Waterproof bins resist rust and corrosion. Bins are autoclavable up to 250 degrees farenheit and are resistant to extreme cold. Available in blue, red and yellow.

Giant Stack Containers:
Multipurpose wide open hopper front provides eascy access for large part storage. Ideal for multiple applications in recycling, storing parts, tools and warehouse items. This bin will stack up to 6 bins high creating a sturdy, tall storage system. Injection molded from high density polyethylene, easy to clean, resists rust and corrosion and impervious to most chemicals. Large label holder allows for quick identification. Optional clear window increases storage capacity and allows for inspection of parts. Six 1/4" drill hole pattern on bottom of bin allow for easy hole insertion or drainage. QGH700 is available in gray, blue, red, ivory and black. QGH600 and QGH800 are available in gray, blue and red.

Bin Storage Centers:
Organize, store and access your medium or large parts with this high capacity bin center. 475 lb. capacity per shelf and over 21 cubic feet of storage space. Smooth powder coat finish and cross bracing for increased stability.

Quantum Magnum Bins
Heavy duty, extra strong injection molded, high density polyethylene bins are ideal for transportation and storage of large and heavy parts. Open hopper front allows immediate accesss and visibility. Ribbed reinforced walls ensure extra strength. Double wall thickness with preformed lip allows bin to interlock and provides up to 150 lbs. stack capacity. Transport these bins easily with rear molded handle. Molded in lable slot. Impervious to most solvents, corrosion, rust and rot resistant. Resists temperatures from -40 F to 250 F. Optional window maximizes storage and prevents spillage. Available in blue, yellow, green, red and black.

Quantum 36" Wide All-Welded Bin Cabinets:
All-purpose cabinets provide secure storage for your valuable tools and parts. Standard performance features: ships completely assembled, ready to use. 14 gauge all-welded construction, gray baked enamel finish which ensures years of heavy duty serve, 3 point locking handle supplied with 2 keys. Bins are avialb

Quantum 48" Wide All-Welded Bin Cabinets:
These 48" wide models offer all the features of the 36", but offer additional storage space. Bins are available in Blue, Yellow, Green Red, Ivory and Black.

Quantum Economy Shelf Bins
Replace worn out corrugated bins permanentely with these tough, durable, high density plastic bins. Quantum Shelf Bins are the industry standard for quality. These durable polypropylene bins feature a molded-in label holder, built in rear hanglock which allows bins to tilt out for complete access when on shelving. A wide hopper front-allows complete access to the contents of the bin. Edges are reinforced for added strength. They are designed for 12", 18" and 24" deep shelf units, racks or standard shelving. Bins are waterproof, impervious to most chemicals and unaffected by grease or oil. Available in Blue, Yellow, Red, Green, Ivory and Black.

Quantum Store-More 6" Shelf Bins:
Replace worn out corrugated bins permanentely with these tough, durable, high density plastic bins. Quantum's Store-More 6" H Shelf Bins are the industry standard for quality. These durable polypropelene  bins feature a molded-in label holder, built in rear hang-lock which allows bins to tilt out for complete access when on shelving. A wide hopper front allows complete access to the contents of the bin. Edges are reinforced for added strength. They are designed for 12", 18" and 24" deep shelf units, racks or standard shelving. Bins are waterproof, impervious to most chemicals and unaffected by grease or oil.

Quantum Super Tuff Euro Drawers:
Super Tuff Drawers are available in nine sizes and four colors and are designed for efficient organization of heavy parts, supplies, tools or equipment. Super Tuff Euro Drawers are injection molded from a virgin grade high impact polystyrene and are virtually unbreakable. With a full 12 guage wall thickness, these heavy duty drawers can be used on Quantum's open and closed shelf units and pick racks. Available in blue, yellow, gray or red.

Quantum Quick Pick Bins:
The most unique storage bins available. This double open hopper bin provides front and back access to stored parts. Bin stack one on top the other, both vertically and cross-wise and nest when empty for space efficiency. Optional dividers may be used front to back, sided to side or both at the same time, dividing the bin into four sections. A molded in label holder on both the front and back of the bin allows for easy parts identification. Bins can be used on standard metal or wire shelving as well as on desks, bench tops or work stations. Available in 6 sizes and 3 colors: Blue, Yellow and Red.

Quantum Patient Drawers:
Drawers are available in four sizes and are ideal for storing patient supplies and medications. All drawers come complete with a clear window. Optional dividers may be purchased seperately.

Did you know that the Geniune Quantum Wire Shelving is now available on the West Coast?
Quantum Chrome Wire Shelving is of excellent quality at the lowest prices available.
This Wire Shelving interchanges with Metro Erecta Shelving, Nextel, Eagle and many off shore brands.

Performance Features:

• All welded construction with additional wire trussing for high strength characteristics

• Top mat wires run front to back (except on 12" x 36" size) for ease of loading and unloading

• Wire allows air to circulate and light to penetrate for increased product visibility

• Minimal dirt accumulation

• Split conical sleeve adaptors secure shelf corner to post

• Numbered grooved posts on 1 inch increments for quick assembly

• No tools required for assembly

• Adjustable foot levelers

• Durable finishes

• Aesthetically pleasing

• Optional accessories

• Applicable for Industrial, Health Care, Food Service and Retail Markets

• National Sanitation Foundation (NSF) Approved

• Shipped KD Class 70

• 600 to 800 lb. capacity per shelf

Material Flow and Quantum have just moved Florida to the Portland Oregon area. Well, not exactly but Material Flow has just been appointed the West Coast  stocking warehouse for Quantum Storage Products.

Initially Material Flow will be stocking the following lines:

-Ultra Stack and Hang Bins: In Yellow, Blue, Red and Green.

-Louvered Panels and Bench Racks, most popular sizes.

-Giant Hopper Bins: Yellow, Blue, Red and Green

- Hulk 24" Containers: Blue, Red and Yellow.

-Hulk 30" Containers: Blue, Red and Yellow

-Hulk 36" Containers: Blue, Red and Yellow

-Hulk Shelving Systems: Complete packages consists of Hulk Bins in 3 colors and Quantum Wire Shelving.

-Quantum Giant Stack Container Storage Units

-Quantum Giant Stack Containers with Wire Shelving

- Plastic Shelf Bins QSB Series: Blue, Yellow, Red and Green

-Quantum Shelf Bin Shelving Systems

-Quantum Shelf Bin Wire Shelving Systems

-Quantum Plastic Dollies and Mobile Carts

-Quantum Stack and Nest Totes SNT Series: Red, Blue and Gray

-QuanTub Nesting Totes: Gray and Blue

-Attached Top Containers in Gray

-Ironman 22 Gauge Steel Shelving in Gray

-Quantum Chrome Wire Shelving Systems

-Quantum Collapsible Bulk Boxes

As you can see, this is a nice start on the Quantum line. We will be increasing our offering as time goes on.

Material Flow has the full selection of Genie material lifts in stock.

Genie offers a complete line of portable, self-contained material lifts that are easy for one person to transport and use for a variety of light, heavy and specialized material lifting tasks. Applications include lifting items such as HVAC, electrical and building materials as well as appliances, computers, warehouse stock, stage lighting and sound equipment.

Material Flow carries the following Genie Material Lifts:

Genie Lift GL Series
The Genie GL Lift is perfect for a variety of jobs. From shipping/receiving to HVAC installation this lift does it all. A portable and compact design makes loading and transporting easy.

Genie SuperLift Contractor
The Genie SuperLift Contractor SLC is designed specifically for the construction industry. The Genie Superlift Contractor can be operated by one person and can lift, lower and move loads up to 650 lbs.

Genie SuperLift Advantage
The Genie Superlift Advantage is a manually operated lift with multiple base, winch and load handling options to create just the lift you need.

Genie Load Lifter
Genie's Load Lifter allows one person to easily lift, move and position heavy loads

Genie Super Hoist
The Genie Super Hoist is powered by either CO2 or compressed air is Based on the first Genie product, the 1966 Genie Hoist.

Genie Super Tower
The Genie Super Tower is designed for theatrical productions and entertainment events. It telescopes lighting, sound systems and scenery weighing up to 800 lbs.

Terex Light Towers
Genie/Terex Light Towers are a must have for any type of night time construction or maintenance. Perfect for road construction, mining operations and oil field applications.